It can be frustrating that your GE dishwasher beeps 3 times and won’t start. But don’t panic! These action-grabbing activities, like beeping three times, are a dishwasher’s way of communicating a problem.
If you are experiencing this issue with your dishwasher and are confused about what to do, you have come to the right place. In this guide, I will take you through the meaning, causes, and troubleshooting steps you need to follow to fix the issue.
By the end of this guide, you will be able to solve the problem without spending hundreds of dollars hiring professionals.
So, let’s dive into it.
Why is my GE dishwasher beeping three times and not starting?
A beeping and not starting GE dishwasher can be caused by several reasons. But as per my research, the most common reason your dishwasher won’t start and beep three times is an open door or defective control panel.
Apart from these, there are a few other causes like water supply issues, software errors, Incorrect settings, clogged filters, and power surges that can trigger the dishwasher to beep three times.
As a repairing expert, I have fixed these issues multiple times in my career. And with those experiences, I believe that an average person with general repair knowledge can do the same.
So, follow the below provided step-by-step methods for addressing your problem.
How to fix the GE dishwasher beeping three times?
Reset your appliance
It is the first thing that you must do whenever your dishwasher acts strange. Resetting the dishwasher refreshes its system and clears out the software error due to power surges.
Resetting can be a simple as well as confusing process. Some dishwasher models have dedicated reset buttons. If your ones don’t have it, follow the steps given below to reset your dishwasher.
- Turn off the power to your dishwasher by flipping the circuit breaker.
- Now, wait until the dishwasher clears its software errors. Usually, it takes around 30-60 seconds for a dishwasher to refresh itself.
- After 30- 60 seconds, restore the power and start a cycle to check if the dishwasher still beeps three times.
Inspect the doors
Another reason for the issue you are facing is the open doors of your appliance. There may be a chance that your dishwasher’s door lock is defective, which is why it is beeping three times and not starting. So, check your dishwasher’s door lock and replace it if needed.
If the doors are still not closing, it means either the door latch is faulty, or the dishes are blocking the door. So, inspect the dishes around the doors and place them right if they are misplaced. Also, check the door latch for visible damage or run the diagnostic mode to test the latch assembly.
Here are the steps you will require to enter the Diagnostic mode on your GE dishwasher.
- Press and hold the “Start” and “Cycle select” buttons for 5 seconds.
- Then, close the door and check the LED lights on the display.
- If the LED light is blinking, it means the dishwasher is still detecting an open door.
You will need to replace that defective door latch to fix the issue. To do so, Follow the given instructions.
- Turn off the power and water supply of the dishwasher.
- Detach the dishwasher from the counter by unscrewing it.
- Unscrew the bottom panel and place it aside.
- Now, pull out the dishwasher from its cabinet.
- Open its doors and unscrew that malfunctioning door latch.
- Remove the wire connector from the old latch and connect it to the new latch.
- Secure the new latch in its place with the screws.
- Lastly, reassemble all the removed parts and put the dishwasher back into its cabinet.
Check the water Inlet valve.
The water Inlet valve is one of the main parts of the dishwasher. It is located on the button of the dishwasher under the kick panel. It opens and closes the water supply according to the appliance’s needs.
If the water Inlet valve is defective or blocked, it can disturb the water flowing into the dishwasher. As a result, the dishwasher will beep three times and won’t start.
Here are the steps you can follow to ensure the proper functioning of your Inlet valve.
- First, check and ensure that the water supply valve is on.
- After that, look for any blockage around the Inlet valve. Obstacles like large food particles or debris can restrict the water flow of your dishwasher.
- If any obstacle is found, remove it in the first place.
- Next, ensure that that valve has no signs of damage. If you see any visible damage, it will be best to replace your Inlet valve.
Unclog the supply hose
Your home water supply line is connected to the Inlet valve by a supply hose pipeline. In case it is clogged or kinked, water will get blocked on its way. So, checking the supply hose when the dishwasher is beeping is always a good decision.
Follow the step-by-step guide to check and fix the supply hose.
- First, turn off the water supply and straighten the kinked hose.
- Then, detach the supply hose from one side and check for any clogs.
- If you find any visible clog, remove it and restore the water supply.
Clean the filter
The filter can be found in the tub of the dishwasher. It is responsible for filtering out the food particles and debris from the water. It helps to prevent the blockage in the hose. But what if the filter is itself dirty?
A dirty filter will block the water from passing through it, causing the dishwasher to beep three times and not start. You can use a brush and warm, soapy water to clean the filter. If it is broken, you might also need to replace it.
Correct the settings
There are some dishwasher settings that can prevent your dishwasher from working correctly. If those settings are active, your dishwasher will signal you by beeping three times.
These are some settings that can restrict your dishwasher from starting.
Demo Mode
There may be a chance that your dishwasher is in demo mode. Under this mode, you will be unable to run the cycle, start the dishwasher, or fill it with water.
To deactivate demo mode, you will need to press the “Start” and “Heated dry” buttons simultaneously for 5 seconds.
Control lock
This feature is also called Child lock. It is designed to prevent accidental touch on your dishwasher’s control. If this feature is turned on, you will be unable to start or change the cycle on your dishwasher.
If you want to turn off the control lock, press and hold the “Cycle pad” or “Dry/Dry boost” and “Steam pad” simultaneously for 3 seconds. The lights will turn off to indicate you have exited the control lock.
Replace your Control panel.
If your dishwasher is still beeping three times, even after trying all of the troubleshooting steps mentioned above, you should replace your control panel.
The control panel controls all the settings and cycles of the dishwasher. If it starts to malfunction, your dishwasher will not start.
A control panel can cost you from $100 to $120, depending upon the model for which you are purchasing. You can get it from the GE online store or any local store. Just make sure the component is genuine.
After purchasing a new control panel assembly, you can proceed to replace it.
Things you will need
- A control panel assembly
- Flat-head screwdriver
- A Plier
After gathering all the required things, follow the below steps.
- First, turn off the power supply and water supply for your safety.
- Then, proceed to remove the outer panel by unscrewing it.
- Now, you will see insulation foam. Remove it without damaging it.
- Use a Flat-head screwdriver to take out the control panel from its position.
- After that, disconnect the wires of the control panel using a plier.
- Connect the cables to the new control panel and fix on in its place by tightening its screws
- Lastly, reassemble all the removed parts to complete the repair.
Here’s a video on fixing the 3 beeps on the GE dishwasher. Watch it for a better understanding:
What should I do if the GE dishwasher continues to beep three times?
If you have tried all of the above-mentioned troubleshooting steps, the issue persists. Here are some more steps that you can do to stop your dishwasher from beeping three times.
Refer to the user manual of your dishwasher.
You must have got the user manual when you purchased your dishwasher. It is a document which contains important information about the product.
The user manual also has detailed explanations and best solutions for common issues that can occur in a dishwasher. You must refer to your user manual for the solution for the dishwasher not starting and beeping three times.
Call the GE customer support helpline.
Calling a GE customer support helpline will be one of the best decisions. They can help you in finding the cause and fixing method for your problem.
To contact them, go to GE’s website and click on “Contact us.” There, you will find the helpline number of your region. Call and ask them about your problem.
Contact a professional technician
If the customer support also fails to help you, contact a private professional technician. They are experts and have mastered solving problems with appliances. You can hire them from online or local repair places. They will definitely help you get out of the problem.
Frequently Asked Questions
Why is the start button blinking and beeping on my GE dishwasher?
A blinking and beeping dishwasher indicates that your dishwasher is facing a software glitch. This can happen due to power surges. To fix this, press the “Reset/Start” button and wait for 2 minutes. Your dishwasher will soon start functioning.
Does unplugging a dishwasher reset it?
If you unplug the dishwasher from the power source for 1 to 2 minutes, it will be enough to reset it. You can also turn off the circuit breaker if the power plug is inaccessible.
Why is my GE dishwasher just beeping?
If your dishwasher is just beeping, it means your dishwasher thinks that the doors open. Close the doors properly. If the doors are not latching, proceed to replace the faulty door latch.
Conclusion
GE dishwasher beeping three times and not starting means that your dishwasher is in trouble. This can be caused by many reasons, including defective door latch, malfunctioning control panel, clogged filter, water supply issues, and software errors.
However, resetting a dishwasher fixes most of the problems. But if the issue continues, you can try repairing the door latch, replacing the control panel, cleaning the filter, and ensuring the water supply.
If the issue persists and you are confused, I recommend you call customer support or contact a professional technician for further help.
This was all from my side. I hope you liked the article. If you have any doubts, please comment. I will be happy to answer you.
